ProCore 648 Greens Aerator

Overview
From the innovative wheels within the coring path, to the large 48″ (122cm) aeration swath, there’s nothing ordinary about the ProCore® 648 aerator. Years of research, customer input, testing and attention to detail went into making the ProCore® 648 the most productive and efficient walking aerator on the market.
Features
  • Toro Titan™ Tines
    View the
  • Deeper, High Quality Holes
    RotaLink™ geometry allows the tines to enter and exit the ground cleanly leaving a high quality result.
  • Ease of Operation
    A single switch on the handle controls the tine head and a handle bail engages forward and reverse. No shifting required. A fail safe system stops the machine and lifts the coring head if bail handle is released.
  • Efficient Aeration
    The ProCore 648 is more efficient with a 48 inch (121.9cm) aeration swath that is 50 – 100 percent wider than competitive units.
  • High Productivity
    The ProCore 648 allows you to aerate more areas in one day with the 48 inch (121.9 cm) aerating swath and clean up is easier and less labor intensive resulting in less time.
  • Innovative Rear Wheel Placement
    The wheels are located in front of the aeration head so they do not drive over the freshly aerated turf and run over the cores.
  • Series/Parallel 3-Wheel Drive
    The patented 3-wheel series/parallel traction drive, combined with high-torque, low-speed wheel motors, prevents slippage for reliable traction and even hole spacing.
  • Smooth, Quiet, Powerful
    To give the ProCore 648 its uncommonly smooth operation, the action of the tine arms are modeled after a six-cylinder car engine. The arms work in pairs to counterbalance the coring action. This precise configuration virtually eliminates hopping, rocking and unnecessary vibration.
  • TrueCore™ Ground Following
    TrueCore™ sensing system automatically maintains tine depth on the fly to match the ground undulations providing consistent coring depth of up to 4″ (10.2 cm).
  • Variable Hole Spacing
    The ProCore 648 gives you more control with variable hole spacing ranging from 1.5 inches to 3 inches (3.8 cm to 7.6 cm) apart.
Specifications
  • Aerating Depth
    Up to 5 inches (12.7 cm)
  • Aerating Width
    64″ or 98″ (1.6m or 2.5m)
  • Lift System
    3-point Category 1 or 2
  • Tine Heads
    8 (864) or 12 (1298)
  • Tractor PTO
    540 RPM
  • Tractor Size
    Recommended Tractor HP – 864: 35hp (26kW) 1298: 50hp (37kW) | PTO: 540 rpm
  • Weight
    1,575 lbs. (714.4 kg) – 2,300 lbs. (1,043 kg)
Get In Touch
x

sale

Get up to 40% OFF today

Lorem ipsum dolor sit amet.

Enquire Now

    Powered by